New installs cover homes without central air, additions, converted garages and new builds. The company sizes the system, picks the equipment location and connects the ducts, drain and power. That process works for any Arlington property. Call the number on this page to be connected with a local AC company in Arlington.

Is this an install or a swap?
If an existing central system is being taken out and replaced, that is replacement work. An installation means designing and adding cooling where none exists, or adding a second zone for an addition. The planning is broader because the house has to be assessed from scratch. Knowing which one you need keeps the conversation with the company focused.
Undersized systems struggle too
An undersized unit may run almost continuously during a hot stretch and still fall short of the thermostat setting. It wears faster and uses more power doing it. A load calculation protects against both extremes, so it is worth asking whether the company will perform one. Neither extreme serves the house well, and the thermostat setting will not tell you which problem you have.
Returns are easy to forget
Supply registers get the attention, but air also needs a way back. Bedrooms with closed doors and no return can pressurize and stay warm. Ask where the returns will go and whether any rooms need transfer paths or their own return. Point out any room that is always warm, since that often means a weak or missing return.
Before work starts in Arlington
Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.
Anyone who opens a refrigerant circuit has to be EPA Section 608 certified, and venting refrigerant is not allowed, so leak work and recharges belong with a certified technician.
Arlington's Planning & Development Services requires a mechanical permit for replacing or changing out heating and cooling equipment, so ask whether the contractor will pull it.
Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.
Companies that take calls here usually also work in Fort Worth, Kennedale and Forest Hill.
Choosing the indoor location
The air handler and coil can go in an attic, a closet or a garage. Attic units save floor space but sit in extreme heat and are harder to service. Closets are easier to reach but use living space. The best choice depends on the house. Ask the company which fits your house.
Comparing quotes fairly
Ask each company to put the same items in writing: the equipment, the duct work, the pad, the electrical work, the permit and the thermostat. When quotes cover the same scope, differences reflect real choices instead of missing line items. Choose the company whose written scope is clearest, since vague scopes cause the most arguments later.
Around Arlington
Calls come in from across Arlington, including around Downtown Arlington, East Arlington, Entertainment District.
About 38% of Arlington's housing units were built before 1980 and roughly 21% were built in the 1970s alone, so a large share of homes are 40 or more years old.
AC Installation questions in Arlington
Where should the outdoor unit be placed?
How long does a new AC installation take?
What should be on a written AC installation quote?
How can I check a company before it works on my house?
More AC and heating services in Arlington
AC Installation nearby
Helpful guides
Sources
Last updated: