Ductless systems can serve a single space or several, with one outdoor unit feeding multiple indoor heads. They suit homes with no duct space or with rooms the central AC misses. Call the number on this page to be connected with a local AC company in Arlington.

Converted rooms and bonus spaces
Finished attics, enclosed porches and converted bedrooms are common problem spots. They sit at the end of a duct run or have none at all. A wall head and a short line set can bring them in line with the rest of the house. Bring up any room that is also hard to heat in winter, since most heads do both.
Heating with a mini-split
Most mini-splits are heat pumps, so the same system cools in summer and heats in winter. In a mild winter climate that is often enough for a garage, bonus room or addition. For very cold nights, ask about the unit's cold-weather ratings. Ask the installer how the system behaves on the coldest nights and what backup, if any, is available.
Sizing each room
A head sized for a small bedroom is too small for a great room. Sun exposure, ceiling height, insulation and glass area all change the number. Good designers calculate each space, then choose indoor heads to match instead of using one standard size. Rooms with tall ceilings, big glass or an afternoon sun load usually need a larger head.
Before work starts in Arlington
Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.
Refrigerant handling falls under EPA Section 608: the technician who connects gauges or recovers refrigerant needs that certification.
If the job is a full replacement, expect a mechanical permit through Arlington's Planning & Development Services. Ask who pulls it and when the inspection happens.
Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.
Companies that take calls here usually also work in Fort Worth, Kennedale and Forest Hill.
Electrical considerations
A mini-split needs its own circuit and usually an outdoor disconnect. If the panel is full or old, an upgrade may be needed. Ask the company to check the panel early so electrical work does not surprise you later. Panels in older homes are the most common source of surprises, so it helps to have it checked early.
Living with a mini-split
Set the remote and leave it. Heavy setbacks make it work harder, and the best comfort comes from steady settings. Keep furniture and curtains from blocking the head, and clean the filter monthly during the cooling season. Doing this small routine all season keeps the unit running well into fall.
Arlington at a glance
Calls come in from across Arlington, including around Downtown Arlington, East Arlington, Entertainment District.
About 38% of Arlington's housing units were built before 1980 and roughly 21% were built in the 1970s alone, so a large share of homes are 40 or more years old.
Ductless Mini-Splits questions in Arlington
Do mini-splits need ductwork?
Are mini-splits noisy?
Where should the indoor head be placed?
Does a mini-split need a permit?
More AC and heating services in Arlington
Ductless Mini-Splits nearby
Helpful guides
Sources
Last updated: