AC and heating referrals for Fort Worth & nearby townsCall: (817) 623-4802
(817) 623-4802

How to check a Texas AC contractor's TDLR license

acrepairfortworth.net

In Texas, a company that does air conditioning and refrigeration work has to hold a license from the Texas Department of Licensing and Regulation. Checking takes a few minutes, and this guide shows what to look for and how city permits fit in around Fort Worth.

Need AC help now?
Call now to be connected with a local AC and heating company in Fort Worth.
(817) 623-4802

In Texas, a company that does air conditioning and refrigeration work has to hold a license from the Texas Department of Licensing and Regulation. Checking takes a few minutes, and this guide shows what to look for and how city permits fit in around Fort Worth.

What Texas requires

According to TDLR, anyone offering air conditioning and refrigeration (ACR) contracting services in Texas must hold an ACR contractor license from the Texas Department of Licensing and Regulation. This applies to central air, heat pumps, furnaces and refrigeration work. It is the state license that matters, and a business card or a truck lettered with a name does not prove anything on its own.

Texas uses two contractor classes. A Class A license covers units of any size. A Class B license covers cooling systems up to 25 tons and heating systems up to 1.5 million BTUs per hour, which is more than any house needs. So for a home, either class can be appropriate.

Each license also carries an endorsement: Environmental Air Conditioning, Commercial Refrigeration, Process Cooling or Heating, or a combined endorsement. For comfort cooling and heating in a house, the Environmental Air Conditioning endorsement is the one that fits. A contractor holding only a commercial refrigeration endorsement is working outside the usual home AC category, so ask about it.

Contractor licenses last one year and are not transferable. That second point matters: a license belongs to the business or person it was issued to, and another company cannot borrow it.

How to run the license check

TDLR offers an online license search that shows whether a person or business holds a TDLR license. You do not need an account. Follow these steps before you let anyone start work.

  1. Get the exact business name. Ask for the legal name of the company and the name of the contractor who holds the license. A trade name may differ from the license name.
  2. Ask for the license number. A contractor who holds one will have it ready. It should also appear on estimates, contracts and advertising.
  3. Open TDLR's license search. Use the verification page on tdlr.texas.gov and search by name or license number.
  4. Read the record. Look at the license type, the endorsement, the status and the expiration date. An expired or inactive record is a reason to stop and ask questions.
  5. Check for penalties. TDLR runs a separate search for penalties and administrative orders. Look the company up there too.
  6. Match the name. The company on your estimate and the company on the license should be the same.

If a company will not give a license number or says the license is not needed for your job, move on. You can read our guide on whether to call for emergency AC repair or wait if you feel pressure to decide quickly, because a rushed decision is when people skip this step.

Technicians and EPA certification

The company license is not the only credential. TDLR says ACR technicians must be registered or certified by TDLR, and workers under 18 must work under the direct supervision of a contractor or a certified technician. When a technician shows up at your door, it is fair to ask who holds the contractor license for the job and whether the person working on your system is registered or certified.

Separately, Section 608 of the Clean Air Act requires technicians who maintain, service, repair or dispose of refrigerant-containing equipment to be certified through an EPA-approved test. That certification does not expire, and apprentices are exempt only when closely and continually supervised by a certified technician. EPA rules also prohibit intentionally venting refrigerant while servicing equipment. If your job involves a leak or a recharge, ask about it. Our guide to refrigerant leaks, R-22 and newer refrigerants explains what you should expect.

City mechanical permits around Fort Worth

A TDLR license and a city permit are two different things. The license says the company may do ACR work in Texas. The permit is the city's record that a specific job is being done and inspected. Many cities want a permit for replacing or altering a heating and air conditioning system, and some tie it to registering as a contractor with the city. The rules below come from each city's own pages, and they do not all say the same thing.

CityWhat the city says
Fort WorthChanging, moving or repairing mechanical equipment, including a central heating and air conditioning system, requires a mechanical permit. Applicants must be a registered building contractor, and an owner may qualify for a homestead permit on a home they own and occupy. Mechanical contractors must hold a valid State of Texas air conditioning and refrigeration license with proper endorsements.
ArlingtonWork on mechanical (HVAC) systems needs a permit, and the city lists heating system repairs or replacements as examples. HVAC work must be done by a trade contractor who holds the required license.
KellerA permit is required to install, alter, repair, remove, convert or replace any electrical, gas, mechanical or plumbing system.
EulessFurnace installation or replacement and air conditioner condenser installation or replacement are listed as work that requires a permit.
SouthlakeIts list of projects requiring a permit includes installing or replacing a furnace or coil, and the city says the list is not all-inclusive.
WeatherfordHVAC work requires permits, and a mechanical permit application is among the common permits listed.

Some cities do not state a clear HVAC rule on the pages we reviewed. In those towns, call the city's permit office before work starts and ask whether your job needs a permit. Do not assume it does not.

Why the permit matters to you

When a company pulls the permit, the work is usually inspected. That can catch a wrong breaker size, a bad drain or a missing safety switch that you would never spot yourself. A contractor who suggests skipping the permit to save money is asking you to take on the risk. Homeowners in Arlington or Keller can use the same steps with their own city's office. Our guide on repairing or replacing your AC explains when a full replacement, which usually triggers a permit, makes sense.

Ask three direct questions: Who pulls the permit? Is the permit cost in the quote? Will there be an inspection? In Fort Worth, the answer should involve a registered contractor, as the city describes. If you own and live in the home, ask the city whether a homestead permit applies, but remember that you would still be responsible for code compliance and the inspection.

What to do if something goes wrong

If a contractor did poor work, took payment and vanished, or was working without a license, TDLR accepts complaints. You can file online or mail a paper complaint form, and Air Conditioning and Refrigeration is one of the categories. Keep your estimate, invoice, photos and any messages. If the problem is a safety issue, such as a gas smell or a carbon monoxide alarm, leave the home and call 911 first, and deal with the complaint afterward.

Some carbon monoxide basics are worth knowing. The Consumer Product Safety Commission recommends CO alarms on every level of the home and outside sleeping areas, and advises having the heating system professionally inspected and serviced annually. If you smell gas from a furnace, our page on what to do when a furnace smells like gas gives the steps.

Using this service

This site is a free referral service. It is not an HVAC company, and it does not do the work. When you call, you are connected with an independent local AC or heating company, and the license check above is still your job. Hold the company to it: ask for the TDLR license number, look it up, and then agree to the work. You can see all AC and heating services, or start with AC repair in Fort Worth. For a list of towns we cover, see the service areas page.

Call now to be connected with a local AC and heating company in Fort Worth.
(817) 623-4802

Frequently asked questions

Where do I look up a Texas AC contractor's license?
TDLR has an online license search on its website that shows whether a person or business holds a TDLR license. It also has a separate search for penalties and administrative orders.
What is the difference between a Class A and Class B license?
TDLR says a Class A license covers units of any size, while a Class B covers cooling systems up to 25 tons and heating systems up to 1.5 million BTUs per hour.
Does a TDLR license replace a city permit?
No. The license is the state's authorization for ACR work. A city permit covers a specific job, and rules vary by city. Fort Worth requires a mechanical permit for changing, moving or repairing mechanical equipment.
How do I file a complaint about an AC contractor?
TDLR takes complaints online or by mailed paper form, and Air Conditioning and Refrigeration is a listed category. Keep your estimate, invoice and photos.
Call now to be connected with a local AC and heating company in Fort Worth.
(817) 623-4802

Last updated:

☎ Call (817) 623-4802