Thermostat installation covers swapping a basic unit for a programmable or smart model, which often needs a common wire, correct settings and a check that the thermostat works with your system. Many Richland Hills homes can be updated in one visit. Call the number on this page to be connected with a local AC company in Richland Hills.

When the thermostat is fine
A thermostat that has power, shows the right settings and clicks when you change them is probably doing its job. If the system still does not respond, the issue is likely downstream, such as a safety switch, a capacitor or a control board. A technician can trace it.
Options when there is no C-wire
- Use a spare wire already in the cable, if there is one
- Run a new cable between the thermostat and the air handler
- Install a power adapter kit designed for the thermostat
The right option depends on the system and the model.
Questions about price
| Ask | Why |
|---|---|
| Is the thermostat included? | Some quotes are labor only |
| Is wiring included? | New cable adds time |
| Is setup included? | Wi-Fi and schedules take time |
Steps in a typical installation
- Power to the system is shut off
- The old thermostat is removed and wires labeled
- The new base is mounted and wired
- Settings for your equipment are entered
- Cooling and heating are tested
- You are shown how to use it
Is it an emergency?
A blank thermostat in the middle of a hot spell is more than an inconvenience, since the house cannot cool at all. Basic safe checks are worth doing first. After that, a call to a local company is reasonable, and many take after-hours calls.
Permits, power and gas in Richland Hills
Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.
Refrigerant handling falls under EPA Section 608: the technician who connects gauges or recovers refrigerant needs that certification.
For Richland Hills addresses, Richland Hills' Development Services office handles mechanical permits; a system change-out is permitted work, and the contractor normally pulls the permit.
Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.
Calls from Richland Hills are often matched with companies that also cover Fort Worth, Hurst and Bedford.
Thermostat Repair & Installation questions in Richland Hills
How do I check a contractor's license?
Why does my smart thermostat keep losing Wi-Fi?
Will a smart thermostat work with my system?
What is a C-wire and do I need one?
More AC and heating services in Richland Hills
Thermostat Repair & Installation nearby
Helpful guides
Sources
Last updated: