Most furnace repairs are small parts, not a whole new furnace. A heating company tests the ignition sequence step by step and tells you what failed before any work starts. Call the number on this page to be connected with a local heating company in Hurst.

Symptom guide
| What you notice | Where a technician looks first |
|---|---|
| Clicking, no flame | Ignitor and gas valve |
| Flame, then shutoff | Flame sensor |
| Blower never starts | Pressure switch, control board |
| Hot, then off | Limit switch, airflow |
Why safety switches trip
- Pressure switch: confirms the draft inducer is moving air before gas flows
- Limit switch: shuts the furnace down if the heat exchanger gets too hot
A switch that trips is doing its job, so the technician looks for the cause, such as a clogged filter, blocked vent or weak inducer motor.
Many Hurst houses date to the 1970s, so a second look at venting, return air and furnace age is a sensible part of any repair visit.
What affects furnace repair cost
The price depends on which part failed, how hard it is to reach and how old the furnace is. A sensor cleaning is a short job; a gas valve or control board costs more. Attic and tight-closet access add labor. Ask for the diagnosis and the repair price in writing before you approve the work.
Useful local contacts for Hurst
AC and heating contractors in Texas need a TDLR air conditioning and refrigeration contractor license, and the number can be looked up on TDLR's online search before anyone starts.
Gas furnaces here are served by Atmos Energy. If you smell gas, leave the house, call 911, then call Atmos Energy at 866-322-8667 from outside.
For Hurst addresses, Hurst's Building Inspections office handles mechanical permits; a system change-out is permitted work, and the contractor normally pulls the permit.
Oncor delivers electricity in Hurst and handles outages at 888-313-4747; your bill and plan come from whichever retail provider you signed with.
Calls from Hurst are often matched with companies that also cover Fort Worth, Bedford and North Richland Hills.
A good diagnosis sounds like this
You should hear which component failed and why, not just that the furnace needs work. A technician should also tell you whether the cause was a wear item or something upstream, like restricted airflow, that will cause the same fault again. Ask questions; a clear answer is a good sign.
Before the next cold front
If your furnace ran poorly last winter, do not wait for the first freeze. Book a tune-up in early fall, test your CO alarms and replace the filter. A heating company can clean the burners and sensor, test the safeties and catch worn parts while it is still easy to schedule.
Hurst at a glance
Calls come in from across Hurst, including around Valentine Oaks, Chisolm Park, North East Mall.
The median Hurst home was built in 1973, so original-era ductwork and equipment replacement are common.
Furnace Repair questions in Hurst
Why does my furnace click but not light?
How often should a furnace be serviced?
How do I know a heating company is qualified?
What happens if I call this number?
More AC and heating services in Hurst
Furnace Repair nearby
Sources
Last updated: