If the indoor unit near your Hurst home is frosting, dripping or blowing weak air, the coil may be dirty, frozen or leaking. A diagnosis separates a cleaning job from a replacement. Call the number on this page to be connected with a local AC company in Hurst.

Weak airflow tells a story
When the coil clogs with dust or ice, air struggles to pass through it, and the vents blow softer than usual. Rooms farthest from the air handler lose cooling first. If a new filter does not help and the blower sounds normal, ask a company to inspect the coil itself.
Airflow, ducts and the coil
Undersized or leaky ductwork, a failing blower motor or closed registers reduce the air moving over the coil and push it toward freezing. Fixing the coil without fixing the airflow problem behind it means the trouble comes back, so a thorough company checks the whole air path.
With homes here built in the 1970s, original ductwork may still feed the coil, and leaky or restricted ducts can contribute to icing, so ask the company to check airflow as well.
Comparing two different quotes
One company may quote a cleaning while another proposes a new coil, because they judged the condition differently. Ask each to show what they found, such as photographs or the fins themselves, and compare what the quote includes. Differences in scope explain most gaps between estimates.
Useful local contacts for Hurst
AC and heating contractors in Texas need a TDLR air conditioning and refrigeration contractor license, and the number can be looked up on TDLR's online search before anyone starts.
Refrigerant handling falls under EPA Section 608: the technician who connects gauges or recovers refrigerant needs that certification.
Hurst's Building Inspections office requires a mechanical permit for replacing or changing out heating and cooling equipment, so ask whether the contractor will pull it.
Oncor delivers electricity in Hurst and handles outages at 888-313-4747; your bill and plan come from whichever retail provider you signed with.
Calls from Hurst are often matched with companies that also cover Fort Worth, Bedford and North Richland Hills.
What to expect when the technician arrives
The technician will usually check airflow, the filter, the blower, refrigerant pressures and temperatures, and then open the access panel to look at the coil. They may use a light or a camera in a tight spot. Ask them to show you what they see and explain it plainly.
When cleaning is enough
- Dust and lint on the fins with no refrigerant loss
- Mild buildup that restricts airflow
- A clean drain pan and an otherwise healthy system
When the coil is intact, a careful professional cleaning can restore airflow and cooling. A company should still confirm that the drain is clear and the filter is the right fit before calling the job done.
More about Hurst
Calls come in from across Hurst, including around Valentine Oaks, Chisolm Park, North East Mall.
The median Hurst home was built in 1973, so original-era ductwork and equipment replacement are common.
Evaporator Coil Repair questions in Hurst
Can I thaw a frozen coil myself?
Can an evaporator coil be repaired?
Will a new evaporator coil fix weak airflow?
Are attic coils harder to service?
More AC and heating services in Hurst
Evaporator Coil Repair nearby
Helpful guides
Sources
Last updated: