When a gas furnace clicks and then goes quiet, the burners are usually failing to light or the flame is not being proven. Those are common, repairable faults. Call the number on this page to be connected with a local heating company in Crowley.

When heat comes and goes
An intermittent furnace is harder to live with than a dead one. It may heat fine at noon and fail at night, or run for ten minutes and lock out. That pattern usually points to a sensor, a switch or restricted airflow near Crowley homes with tight closets and long duct runs, and it rarely fixes itself.
Airflow problems that mimic part failures
A dirty filter, closed or blocked registers and crushed ductwork choke airflow, and a choked furnace overheats and cycles on the limit switch. The furnace itself may be fine. A good technician checks airflow along with the parts, which is why a filter change is worth doing before the first call.
Cost drivers, in plain terms
- The part itself and whether it is in stock
- How long the diagnosis takes
- Access: attic, closet or crawl space
- Whether the furnace is still supported by parts makers
- After-hours or weekend rates, which vary by company
Test run before they leave
- The furnace completes a full heating cycle.
- The flame looks steady and blue.
- Warm air reaches the registers.
- The thermostat shuts the furnace off when it reaches the setpoint.
Stay for the full cycle if you can.
Keep it safe between visits
Change filters on schedule, keep the area around the furnace clear of boxes and chemicals and never block the combustion air or flue. Do not remove panels or bypass a safety switch to get heat. A tripped switch means something is wrong, and bypassing it is how small faults become hazards.
Before work starts in Crowley
AC and heating contractors in Texas need a TDLR air conditioning and refrigeration contractor license, and the number can be looked up on TDLR's online search before anyone starts.
Gas furnaces here are served by Atmos Energy. If you smell gas, leave the house, call 911, then call Atmos Energy at 866-322-8667 from outside.
If the job grows into a full system replacement or new ductwork, ask whether a mechanical permit is needed from Crowley's Community Development Department.
Power outages here go to Oncor at 888-313-4747, not to your retail electric provider. If the AC and the lights are both out, check that first.
Nearby, the same kind of help is available in Fort Worth, Burleson and Everman.
Furnace Repair questions in Crowley
What does a flame sensor do?
Can I fix my furnace myself?
Why does my furnace smell when I first turn it on?
What happens if I call this number?
More AC and heating services in Crowley
Furnace Repair nearby
Sources
Last updated: