An AC that runs but does not cool is usually a thermostat setting, a clogged filter, a frozen coil, a tripped breaker or a refrigerant problem, in roughly that order of how easy they are to check. The first four you can look at safely; refrigerant always needs a technician. Call the number on this page to be connected with a local AC company in Southlake.

Step one: the thermostat
Confirm the thermostat is set to cool, not heat or fan only, and that the target is a few degrees below the room reading. Dead batteries or a blank display can stop the system entirely. A programmable or smart thermostat may also be following a schedule you forgot about, so check for a hold or an away mode.
The blower is only half the story
If you can hear the air handler and feel air at the vents, the blower is working, and the question becomes whether that air is cold. If you hear nothing, check the thermostat and breaker. A silent blower with power can mean a failed motor or capacitor, which is a repair, not a setting.
The median home in Southlake was built in 1999, so a newer system that stops cooling often has a single failed part, a clogged filter or a drain issue rather than age.
Water near the air handler
When ice melts, water has to go somewhere. The drain pan and condensate line carry it away, and a clogged line or a tripped float switch can stop the system or let water spill. If the AC shuts off with a wet pan, the float switch may have done its job. Cleaning the line is a technician's task.
Local details for Southlake
Texas requires anyone contracting for air conditioning and refrigeration work to hold an ACR contractor license from the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it on TDLR's license search.
Anyone who opens a refrigerant circuit has to be EPA Section 608 certified, and venting refrigerant is not allowed, so leak work and recharges belong with a certified technician.
Southlake's Building Inspections office requires a mechanical permit for replacing or changing out heating and cooling equipment, so ask whether the contractor will pull it.
Southlake is in Oncor's delivery area: Oncor maintains the lines and restores outages (888-313-4747), while you buy power from the retail electric provider you chose.
Companies that take calls here usually also work in Fort Worth, Colleyville and Grapevine.
Step four: power and the outdoor unit
Check the breaker for the outdoor unit and the one for the air handler; if either has tripped, reset it once. Make sure the outdoor disconnect is on. Then look at the condenser: the fan should spin, and the coil should be clear of grass, leaves and cottonwood fluff.
What the technician measures
| Check | What it shows |
|---|---|
| Temperature drop across the coil | Whether cooling is adequate |
| Refrigerant pressures | Possible leak or restriction |
| Compressor amps | Compressor health |
Together these readings show whether a repair or a replacement conversation makes sense, and they give you something concrete to ask about before approving any work.
Around Southlake
Calls come in from across Southlake, including around Southlake Town Square, Bob Jones Park, E Dove Rd.
The median Southlake house or condo was built in 1999, so many systems are in the second-replacement window.
AC Not Cooling questions in Southlake
Why is cool air coming from only some rooms?
What does it mean if there is ice on my AC?
My AC blows warm air but the outdoor unit is running. Why?
Will the AC cool down on the hottest days?
More AC and heating services in Southlake
AC Not Cooling nearby
Helpful guides
Sources
Last updated: