A refrigerant leak means the sealed system has a hole or a loose joint somewhere, and the gas that escaped has to be replaced after the leak is repaired. Adding refrigerant alone only buys a short delay. Call the number on this page to be connected with a local AC company in Kennedale.

Signs the system may be low on refrigerant
Air that feels cool but never catches up with the thermostat is the classic clue. Others include frost on the copper line near the outdoor unit, a faint hissing or bubbling at the indoor unit, and a system that runs most of the afternoon. Each one is worth a call, because running low strains the compressor.
North Texas conditions that stress the sealed system
Months of heat expand and contract copper, vibration loosens fittings, and shifting clay soil can tug on a line set. Attic coils sit in heat and humidity, which encourages corrosion. None of that is unusual, but it explains why leaks show up in systems that were fine for years.
Local details for Kennedale
Before you approve the work, check the company's ACR contractor license with TDLR; the state agency also takes complaints about AC contractors.
Refrigerant handling falls under EPA Section 608: the technician who connects gauges or recovers refrigerant needs that certification.
Kennedale's Building Inspections Division requires a mechanical permit for replacing or changing out heating and cooling equipment, so ask whether the contractor will pull it.
Kennedale is in Oncor's delivery area: Oncor maintains the lines and restores outages (888-313-4747), while you buy power from the retail electric provider you chose.
Companies that take calls here usually also work in Fort Worth, Everman and Forest Hill.
Small leak, bigger leak, different math
A loose flare or valve core is often a short repair. A pinhole in a coil usually means replacing the coil, which costs more, and a damaged line set can mean pulling new copper through a wall or attic. The age of the system then decides whether the larger repair still makes sense.
R-22 and the repair-or-replace question
With an R-22 unit, the question often becomes whether to patch an aging system or move to current equipment. Factors include the age of the compressor and coils, the size of the leak, and how long you plan to stay. There is no single answer, only a fair look at the unit.
What to expect when the technician arrives
The visit usually starts with questions about symptoms and the age of the system, followed by a check of airflow, temperatures and pressures. Then comes the leak search. The technician should tell you what they found, show you where if possible, and explain the repair choices before touching the sealed system.
Refrigerant Leak Repair questions in Kennedale
Can a company just add refrigerant to my AC?
What is R-22 and does my system use it?
Does a leak mean my AC is on its way out?
What should I tell the company when I call?
More AC and heating services in Kennedale
Refrigerant Leak Repair nearby
Helpful guides
Sources
Last updated: