When a heating or cooling system stops working properly, the cause can be electrical, mechanical, airflow-related or in the controls. Independent companies diagnose all four, and some focus on cooling or on heating, so say what you need. Call the number on this page to be connected with a local AC company in Bedford.

Airflow problems
Weak flow from the vents, rooms that never match the thermostat, or a loud blower all point to airflow. Causes include a clogged filter, a failing blower motor, leaking or crushed ducts and closed dampers. A technician can usually narrow it down by checking pressure and temperatures. Weak flow in only some rooms usually points at ducts; weak flow everywhere points at the blower or filter.
Attic equipment in the heat
Many homes here put the furnace or air handler in an attic that gets extremely hot in summer. Heat shortens the life of wiring, boards and motors, and a failed drain pan or clogged line can leak into the ceiling. Access is tight, which also affects how repairs are done. Tell the company if your unit is in the attic so they plan for the access.
Before work starts in Bedford
Before you approve the work, check the company's ACR contractor license with TDLR; the state agency also takes complaints about AC contractors.
Anyone who opens a refrigerant circuit has to be EPA Section 608 certified, and venting refrigerant is not allowed, so leak work and recharges belong with a certified technician.
For Bedford addresses, Bedford's Building Inspections office handles mechanical permits; a system change-out is permitted work, and the contractor normally pulls the permit.
Oncor delivers electricity in Bedford and handles outages at 888-313-4747; your bill and plan come from whichever retail provider you signed with.
Companies that take calls here usually also work in Fort Worth, Hurst and Euless.
Repair or replace?
For a younger system with one failed part, repair usually makes sense. For an older system with repeated failures, an expensive part such as a compressor, or an R-22 leak, replacement may be the better value. Ask the company to explain both options plainly. The decision is yours, and a second opinion is reasonable.
Safe checks first
Check that the thermostat is set to the right mode and temperature, the filter is not clogged, and the breaker has not tripped. Look for a float switch that has shut the AC off. These checks take a few minutes and cost nothing. Do not open electrical panels or touch refrigerant lines; those belong to a technician. If any of these fixes the problem, you have saved a visit.
Keeping a service record
Write down each repair: the date, the part and the company. A pattern shows when a unit is declining. The record also helps a new technician diagnose faster and is useful if you sell the home.
HVAC Repair questions in Bedford
What does HVAC repair include?
My thermostat is blank. Is the system broken?
Can I fix my HVAC system myself?
How do I check an HVAC company's license?
More AC and heating services in Bedford
HVAC Repair nearby
Helpful guides
Sources
Last updated: